SF6 density relay, sf6 gas density monitor

  According to what basis? Is there a national standard?   Density relay detection practice   1, detection cycle and testing requirements   According to the provisions of the national standard and industry standards, SF6 electrical equipment testing cycle and requirements are as follows:   1) The new SF6 electrical equipment is required to carry out gas density relay detection.   2) on the operation of the sf6 gas density monitor detection cycle is defined as: handover, the operation of 1 to 3 years, after overhaul, if necessary.     3) gas density relay action value, should meet the technical requirements of the product or according to the manufacturer. The error of the indication value of the pressure gauge and its variation shall be within the allowable error range of the corresponding grade of the product.   There are a lot of foreign products related to the contents of this manual, as every 5 to 10 years of maintenance...

Frequency conversion series resonant voltage test device found that this year, Hubei Electric Power Company in accordance with the State Grid Corporation to promote the integration of information and communication work in general, in accordance with the requirements of the integrated operation system, Wuhan Hengda Electric Co., Ltd. SF6 density relay calibrator The establishment of information and communication dispatching center, the integration of information and communication scheduling resources, relying on the relevant technical support system, the development of integrated monitoring platform, information and communication dispatchers on duty, to achieve information communication operation monitoring, fault handling, scheduling command " "Unified monitoring information communication sf6 gas density monitor system and equipment operation status and key indicators, unified scheduling information and communication system resources and operation mode, unifi...